Rather than using the traditional optical fingerprint scanner, it uses the most-advanced capacitive fingerprint sensor for fingerprint acquisition, to achieve the highest fingerprint-identification results in the industry. Unlike other security systems, iGuard includes the embedded Web Server, which enables all computers, such as Apple Macintosh, PCs & Unix machines, in the corporate computer network to setup, maintain and access the information of the device simultaneously using the Internet Browser. Since no additional license is required for individual users or workstations your company can track & maintain real time data of up to 5000 personnel within any variety of facilities. Remotely connect via modem to the host computer; private network or internet. The included software has the capability to track work location, job description and employee status without input of codes at users unit. This data can be exported in an Excel (*.xls) or Access (*.mdb) format. Reports can be generated for employee's as well as department statistics. APSI has the capability to customize your software to produce a report that conforms to existing formats your department uses. (GSA Form 139) iGuard Reader w/ Embedded Web Server, Smart Card only (1,000 Users) |
|
| iGuard LM SeriesiGuard Reader w/ Embedded Web Server, Fingerprint & Smart Card (1,000 Users) Master Only |
|
|
| iGuard Facility AccessFingerprint/Smart Card 1000 Users |
|
|
| iGuard Super Master Components(5,000 Users, 10,000 FP Templates, 20,000 Transaction Records) |
|
|
| iGuard Components:Super Master Server Unit (10,000 Users, 20,000 FP Templates, 20,000 Transaction Records) |
|
|
| iGuard Super Master Components(20,000 Users, 40,000 FP Templates, 20,000 Transaction Records) |
|
|
| With this feature, your workforce can gain access to the iGuard faster and smarter, by using the Philips Mifare Contactless Smart Card. Each user would have his / her own smart card, which stores the user information including the name, company & branch code, and the fingerprint information. Contactless smart cards contain an embedded antenna instead of contact pads attached to the chip for reading and writing information contained in the chip's memory. Contactless cards do not have to be inserted into a card acceptor device. |
|
|
| Whether you are in an airport lounge or a hotel room, you can always check if your employees are already in the office or not, and you can even control, modify or disable their access rights to your office remotely via internet connection. |
|
|
| The new fingerprint sensor features enhanced imaging capabilities, electrostatic discharge (ESD) performance and improved ruggedness to provide superior levels of accuracy and reliability for fingerprint authentication. |
|
|
| The built-in Database Server allows obtaining the employee information and the access & attendance records easily, thus cutting the processing time for jobs like payroll calculation from days to minutes. |
|
|
| With iGuard, users can be authenticated and verified through either Fingerprint, Smartcard or Password. Depending on the different time period, you can set up the iGuard that the users can just simply present their smartcard to get authorized (such as during high-traffic period). Or require high-security fingerprint verification (such as after office hours or during weekends and holidays). |
|
|
| When you can easily and conveniently assign different access rights to your employees, you can plan your security better and maximize the effectiveness of the human resources. iGuard empowers you to manage the access rights of each individual employee easily anytime, anywhere using any web-enabled computers or mobile devices. |
|
|
| iGuard is a wall-mounted unit elegantly designed with extremely small footprint. In fact, it is the smallest stand-alone biometrics device available in the market today. 105(W)mm x 38(D)mm x 150(H)mm Simple clean lines allow iGuard to be mounted in sophisticated contemporary environments. |
|
|
| Mulitple iGuard units can be setup as a Master/Slave network. Under this configuration, one iGuard would be assigned as the Master, and all other units are configured as slaves. When a user enroll's in any one of these iGuard units, his / her user information, including the fingerprint information, would be replicated to all other iGuard units in the same master / slave network, so the same user does not need to enroll multiple times in order to have the access rights to all these units |
|
|
| This controller further increases the security level by controlling the door strike from inside of the premises. With this optional controller, the iGuard sends a special signal to this controller to open the door, rather than directly open the door with the internal relay. Because this optional controller is installed inside the premises, it is now impossible for the intruders to get into the premises, even if they break the iGuard. |
|
|
| (12V DC) Power Plug. The power requirement is 12V DC, 600mA. Since most of the door strikes require the same 12V DC power supply, iGuard may share the same power supply with the door strike. Door Strike (Optional) Terminals #3-5 (3-4 Normal Open, 4-5 Normal Close). These terminals are connected directly to the internal relay, rating at 12V / 5A. If the door strike is within this current limit, it can be directly connected to these terminals. If the system is used solely for Time Attendance System, these terminals can be left open. Door Sensor (Optional) Terminals #6-7. It provides iGuard the current status of the door (open / close). If the door is left open for over 10 seconds, iGuard will generate beep sounds to alert the people. Open Door Switch (Optional) Terminals #8-9. An optional door switch can be connected to these terminals. It is used to open the door remotely, such as opening the door from the inside of the business premises, or from the reception area. External Alarm (Optional) Terminals #10-11. This is used for optional external alarm. If the case of the device is forced open during operation (such as a break-in), an internal sensor will trigger this connection, and it will sound the external alarm. |
|
|
| All the necessary hardware and software is built-in to the device, including the hardware to connect the system to the corporate network. All you need to do is to plug-in the popular RJ-45 network cable to the back of the device. No other hardware and wiring is necessary. |
|
|
| iGuard Components:Super Master Server Unit (10,000 Users, 20,000 FP Templates, 20,000 Transaction Records) |
|
| In an effort to protect our customers, all order's placed online will be subject to credit verification. Your order must include the correct billing address for processing. In some situations where the purchase appears to be suspicious we will contact the issuing bank for verification of cardholder. |